Key Takeaways

• An Amazon Prime Air Boeing 767 overran the runway at Miami International Airport on Sunday.
• The aircraft struck multiple vehicles upon leaving the tarmac, causing a significant fire.
• More than 60 fire units responded to suppress flames, though injury status remains unclear.
• All runways at the airport were closed, imposing a ground stop for all flights.
• Air traffic control audio reveals pilots did not declare an emergency prior to the landing.

An Amazon-owned cargo aircraft departed its designated path at Miami International Airport on Sunday, resulting in a dramatic overrun that sparked a fire and struck several vehicles on the ground. Video footage captured the aftermath of the incident, showing the plane off the runway alongside a road.

Miami-Dade Fire Rescue confirmed via an X post that the aircraft hit multiple vehicles upon landing. Firefighters arrived to find the plane engulfed in heavy flames and thick smoke. Over 60 emergency units were dispatched to the scene to extinguish the fire and assess any potential patients. It remains unclear at this time whether anyone was injured during the crash.

Incident Details and Response

A review of air traffic control audio by CNN indicates that the pilots did not declare an emergency before the landing occurred. This lack of prior warning adds to the mystery surrounding the mechanical or operational failure that led to the event. The Federal Aviation Administration provided specific details regarding the flight's origin and destination.

“21 Air Flight 7598 overran the runway after landing at Miami International Airport around 2 p.m. local time,” the FAA stated in a statement to CNN. The agency identified the aircraft as a Boeing 767-300 cargo plane. According to the FAA, the flight had departed from Luis Muñoz Marín International Airport in San Juan, Puerto Rico.

Tracking site Flightradar24 data shows that the journey from San Juan took slightly more than two hours. The aircraft landed on runway 30, which FAA data confirms is more than 9,000 feet long. Despite the considerable length of the runway, the aircraft was unable to stop within the designated pavement, leading to the severe incident.

Airport officials acted swiftly to manage the situation's aftermath. An airport spokesperson, who identified the plane as a Prime Air flight, confirmed the severity of the disruption. Consequently, all runways at the airport were closed, and a ground stop was put into effect. This closure grounded all arriving and departing flights, causing significant delays and cancellations across the hub.